Cell count, voltage and C rating calculator
- Fully charged
- 12.6 V
- Storage voltage
- 11.4 V
- Cutoff under load
- 9.6 V
- Max continuous current
- 250 A
- Energy
- 55.5 Wh
- 1C charge current
- 5.0 A
3S 5,000mAh packs and a matching charger
Matched to your numbers3S is 11.1 V nominal and 12.6 V fully charged. At 50C, 5,000mAh is rated for about 250 A continuous on paper. These are the closest listings with a C rating at or above yours.
HOOVO 3S 11.1V Lipo Battery 5200mAh 80C HardCase Battery
5,200mAh 3S 80C is 416 A continuous on paper, the closest capacity listed to your 5,000mAh, as no verified listing has exactly that. C ratings are the maker's figure; check the listing.
Under $50
Check price on AmazonZeee 3S Lipo Battery 5200mAh 50C 11.1V RC Batteries with XT60
5,200mAh 3S 50C from Zeee, a second option at a nearby capacity. Compare the plug and the tray size.
Under $50
Check price on AmazonLiPo Battery Charger RC Car Balance Charger
For a 3S pack. Listed for up to 6S at 6 A and 80 W AC. Charging a 5,000mAh 3S pack at 5.0 A takes about 64 W, so it fits.
Under $50
Check price on AmazonPAWBOSE Lipo Safe Bag
For charging and storing the pack. Charge and store by the pack maker's instructions; a bag does not replace them.
Under $25
Check price on AmazonWant the whole list? One click puts the 3 matched items (not the alternatives) in your Amazon cart, with quantities. Check sizes, plugs and pitch there before you check out.
Add all 3 to Amazon cartEach LiPo cell is 3.7 V nominal and 4.2 V full, so a 3S pack is 11.1 V nominal and 12.6 V full. Maximum continuous current is capacity in Ah times the C rating: a 5000mAh 50C pack is rated for 250 A.
The formula
nominal V = cells x 3.7 | full V = cells x 4.2 | storage V = cells x 3.8 | cutoff V = cells x 3.2 max continuous A = (mAh / 1000) x C | energy Wh = Ah x nominal V
Listed C ratings are often optimistic. Treat the result as an upper bound and buy packs with comfortable headroom over your real draw.
What voltage is a 2S, 3S, 4S and 6S LiPo?
Voltage is set by cell count alone. Capacity and C rating do not change it.
| Cells | Nominal | Full | Storage | Cutoff |
|---|---|---|---|---|
| 1S | 3.7 V | 4.2 V | 3.8 V | 3.2 V |
| 2S | 7.4 V | 8.4 V | 7.6 V | 6.4 V |
| 3S | 11.1 V | 12.6 V | 11.4 V | 9.6 V |
| 4S | 14.8 V | 16.8 V | 15.2 V | 12.8 V |
| 6S | 22.2 V | 25.2 V | 22.8 V | 19.2 V |
| 8S | 29.6 V | 33.6 V | 30.4 V | 25.6 V |
What does the C rating on an RC battery mean?
C rating is the maximum continuous discharge current as a multiple of capacity. A 5000mAh pack is 5 Ah, so 50C means 250 A. It is a ceiling, not a target: a 1/10 4x4 on 3S rarely averages more than 35 A. What a higher real C rating buys you is lower internal resistance, so the voltage sags less, the pack runs cooler and the car holds its speed later into the run.
Some 6S bashers run two 3S packs in series. That gives 6S voltage at the capacity of one pack; the cell count calculator treats that as 6S.
Is LiHV different?
LiHV cells charge to 4.35 V instead of 4.2 V, which adds a little voltage and punch. They need a charger with a LiHV mode. Charging a normal LiPo in LiHV mode overcharges it, which is dangerous. If you are not sure what you have, charge in plain LiPo mode.
Car packs by cell count
More from the verified catalog across the price range, with a budget, a middle and a premium option in each category.
Get this list emailed to you
Every pick on this page with its link and budget tier in one email, so you can decide later. One email, no sequence.
Sent. Check your inbox.
After the list, a few short emails, then a couple a month at most. Unsubscribe anytime. You can also just bookmark this page.Frequently asked questions
How many volts is a 3S LiPo?
A 3S LiPo is 11.1 V nominal, 12.6 V when fully charged, about 11.4 V at storage charge and should not be run below about 9.6 V under load. The three cells are wired in series, so their voltages add. Capacity in mAh and the C rating do not change the voltage; only the number of cells does.
Is a higher C rating better for an RC car?
Up to a point. A pack with a genuinely higher C rating has lower internal resistance, so it sags less and runs cooler, which you feel as more punch late in a run. Beyond what your car can draw it adds nothing but cost. For most 1/10 cars a quality 50C pack is plenty; heavy 6S trucks benefit more.
What is the storage voltage for an RC LiPo?
About 3.8 V per cell, which is 7.6 V for 2S, 11.4 V for 3S and 22.8 V for 6S. Most balance chargers have a storage mode that charges or discharges to this level. Store packs this way if you will not use them for more than a few days, because full or empty storage ages cells quickly.
Can I use a 3S battery in a 2S RC car?
Only if the ESC and motor are rated for 3S. Many brushless 1/10 trucks list 2S to 3S support, often written as 2S-3S or 223S. Putting 3S into an ESC rated for 2S can destroy it instantly. Even on a 3S-capable car, gear down a tooth or two for 3S to control motor temperature.
How much current does an RC car draw?
Average draw is usually far lower than people expect: about 5 A for a crawler at trail pace, 12 to 25 A for 1/10 2WD cars, 25 to 40 A for 1/10 4x4 brushless on 3S, and 45 to 60 A for 1/8 6S bashers. Peaks on hard launches can be several times higher, which is what the C rating has to cover.
RCCarCalc is researched guidance, not professional advice. Figures come from published manufacturer specifications, listings and verified owner reports, not hands-on testing. Speeds are theoretical or as listed; real results depend on gearing, battery, tires and terrain. See how we research.